|
|
Post by fierodude on Aug 28, 2008 20:35:32 GMT -5
I’m looking for a 350 block (or if by some ungodly miracle a 400 block). It has to be the old 2 piece rear oil seal type and include a rotating assembly. I also need an oil pan with it. I don’t need heads, valve train or anything else with it, but I will buy a complete engine to get these parts. Preferably as cheap as possible, but I need it to be reliable as this has to drive me to school everyday. The perfect block would be a mid 70's 4 bolt 350 with low compression heads, but I’m open to almost anything
|
|
|
|
Post by lowrad on Aug 28, 2008 21:50:58 GMT -5
Probably a few at Tafts  350's are a dime a dozen I wouldn't think ya'd pay more than 100 and change for one at Tafts....I mean I got that Sterling rear diff for BurntJeep for like 60bucks or someting and I didn't touch a thing....don't know what they'd want at Tafts....phone and ask.....then go check out what they've got ......I mean ya can tell if it's got a dent in the pan then it's no good....or if it's seized....forget about it too...but ya could probably find one there in decent shape and give it a minor rebuild(re-ring...and whatnot...)just enough to freshin it up |
|
|
|
Post by burntjeep on Aug 28, 2008 23:12:08 GMT -5
Ok mid 70's short fourbolt main lowcomp heads, do know about heads but i'll keep an eye out for it, i'd love to find ya a 327 but thats a pipe dreamLOL.
|
|
|
|
Post by burntjeep on Aug 29, 2008 17:13:01 GMT -5
was looking on net for 350 short block saw some things on Kikijji & ebay just type in 350 short block, there was a 350& 400 both i think for 260$
|
|
|
|
Post by fierodude on Aug 29, 2008 22:28:17 GMT -5
i looked on kijiji and found a few cheap trucks i think a may buy the one colton mentioned i could use all the spare parts and most of the 350's i'm finding are in the $300+ range and this blazer is $400
|
|
