|
Post by lowrad on Nov 11, 2007 17:33:31 GMT -5
WELL it finally happend....the Waggy is down' Today when putting some firewood away with the help of BurntJeep I seen some of MudSlinger's buddy's that where with him last night go by...and since I'd just put the altinator in(thanks BAD and Crazy by the way ) I figured lets go watch them and take a break.... Watched one get stuck and since his buddy had went off somewhere I hooked on to him I used the winch and when I started to slide forward I put the Waggy in reverse and gave it a little dig.....then that didn't work so I stoped winching and gave it a good jerk....WELLLLL Waggy didn't like that(it must be noted that I new when I replaced the Ujoints when I was trying to get Waggy ready for Greens I new that the inners shafts wern't the greatest...the ears had started to bend in) SO when I jerked the guy to get him out......both axle shaft u-joints let go and bent and chewed the ears on the axle shafts SO Waggy is down for awhile....Hmmmm I wonder how much Super 30 spline shafts are :Dcould be an excuse
|
|
|
Post by wranglerboy on Nov 11, 2007 17:39:33 GMT -5
Man, that sucks Low! If'n you need a hand, let me know! I'm on Mids this week and next.
|
|
|
Post by TWISTED on Nov 12, 2007 14:33:06 GMT -5
Bad Pimper Dude>>>>
Say Never To: Pulling Out a Vehicle with a Tow Strap or Winch Cable!!!!
Use your Winch Only!!!!Block Your Wheels!!!!
Stinger Says: Because Bud Broke Stingers Gears that way!!!!And Ripped off The Trailer Hitch Also!!!! Bud Now Says: Stupid Is!!! What Stupid Does!!!
To much pressure on all drive train and the truck it self...
|
|
|
Post by bushwacker on Nov 13, 2007 4:20:02 GMT -5
There is only one thing that you should yank & its mine.
|
|
|
Post by wranglerboy on Nov 13, 2007 6:45:24 GMT -5
Yours was already yanked Bushy! Remember? It's going to be rebuilt again!
|
|
|
Post by bushwacker on Nov 13, 2007 7:10:23 GMT -5
I wasn't referring to my motor ! You ARE innocent !
|
|
|
Post by wranglerboy on Nov 13, 2007 16:14:36 GMT -5
I am innocent until proven guilty! You know that! LOL
|
|
|
Post by burntjeep on Nov 13, 2007 19:22:14 GMT -5
Lmao, thats coolBush, yeah can,t help but keep the ball rollin a little, when your done with Bushy, i got somethin for ya to latch onto Low L.O.L.
|
|
|
Post by badgirl on Nov 13, 2007 21:27:10 GMT -5
lol..... i cant even come up with a reply......finally someone is willing to take him....... ya!!!!!! damn was that an inside thought........lol badgirl
|
|
|
Post by lowrad on Nov 14, 2007 5:43:28 GMT -5
|
|
|
Post by badgirl on Nov 15, 2007 7:20:20 GMT -5
Bring it ...... ;D ;D ;D ;D
lol
badgirl
|
|
buffy
New Member
Posts: 33
|
Post by buffy on Nov 15, 2007 20:03:16 GMT -5
Do I see Dana 60's in Wag's future?
|
|
|
Post by lowrad on Nov 15, 2007 20:40:52 GMT -5
That would be "NICE" OR even D44's.....BUT gota find them first...and then come up with money...THEN if there not Rubi's or something that was designed for Coils...I need to get everything made up on the Axle...... SO I think I'll just be grabbin up some Axles outa a 96 or older XJ or TJ from somewhere...Bigger U-joints ;)297vs my 260
|
|
buffy
New Member
Posts: 33
|
Post by buffy on Nov 18, 2007 17:20:06 GMT -5
Dude... don't waste your time with the stock axles. Buy some 44's and make them fit. Jeeps are built, not bought, right?! ;D 44's and lockers and you'll be climbing rocks like a greased octapus...
|
|
|
Post by TWISTED on Nov 18, 2007 17:56:34 GMT -5
Buffy!!!! No matter what Pimper Dude puts in the Waggy he'll find a way the bust it up>>> <<<<< The harder he builds it..The harder he'll drive it...Right Low!!! Bushy just leaves his parked..and some A_sH_le does it for him..
|
|