|
|
Post by 89yjdude on Sept 11, 2007 12:02:24 GMT -5
yea i know that much now haha..and i dont have the jeep on the road yet so it isnt here and im only here from 11 45 till 330 mon to fri so if ur gonna stop by ask for collin
|
|
|
|
Post by wranglerboy on Sept 11, 2007 23:07:32 GMT -5
there is a write up on the cable shift on either Jeep Kings or Krawlerz. can't remember which.
The main benefit to being locked all the time is the if the splines are not lined up, it will NOT lock in. If you are stuck with no movement possible, when you shift to 4x4, you will still be in 2wd. If it is locked in, it is always 4x4 ready.
If I can find the thread on the cable shift, I'll post it up for ya.
|
|
|
|
Post by 89yjdude on Sept 12, 2007 11:23:22 GMT -5
yea i saw it on jeepkings but we just used washers and i think it should be good to go now
|
|
|
|
Post by wranglerboy on Sept 12, 2007 11:44:49 GMT -5
You can also use large ring clamps to hold it in place on the shafts.
|
|
|
|
Post by 89yjdude on Sept 12, 2007 15:04:13 GMT -5
yea...well im hoping the washer do it...hoping no more problems..now i just need to find a set of 33 cheap haha
|
|
|
|
Post by 89yjdude on Sept 13, 2007 15:10:00 GMT -5
it works!! i have 4x4 now..all i need is some 31 or 33 and ill be good to go
|
|
|
|
Post by wranglerboy on Sept 13, 2007 23:02:24 GMT -5
Well once I buy some 35's I'll have some 33's for sale. But could be a bit. LOL
|
|
|
|
Post by 89yjdude on Sept 14, 2007 15:28:27 GMT -5
haha yea i need them like asap my front tires are toally effed cuts in the side walls and everything..and just stock size
|
|
|
|
Post by lowrad on Sept 14, 2007 16:36:53 GMT -5
If you had 16 inch rims I got a set of 32's...not M/T's BUT they are in good shape...there Sport Kings A/T's
|
|
|
|
Post by 89yjdude on Sept 15, 2007 10:46:47 GMT -5
where abouts do u live so i can take a look...i can get rims
|
|
|
|
Post by lowrad on Sept 15, 2007 12:05:07 GMT -5
I live in Ameliasburgh...the tires aren't hear right now there at Gotmud's place BUT I will be going to get them tommorow
|
|
|
|
Post by 89yjdude on Sept 15, 2007 12:13:02 GMT -5
alright what do u want for them?
|
|
|
|
Post by burntjeep on Sept 15, 2007 16:22:25 GMT -5
doesnt take much vac, sounds like water was the culpret lots of lube there very tender need to be very clean & lubed as ure dealering with pneumatics.
|
|
|
|
Post by 89yjdude on Sept 15, 2007 21:09:15 GMT -5
im not sure i locked it in with washers and it works..then i blow up the back driveshaft today haha i can win
|
|
