|
|
Post by mrbadweld on Apr 6, 2008 18:17:26 GMT -5
I have a locker but I need an open carrier to install it. My limited slip is useless. Any one have one?
|
|
bird
New Member
Posts: 16
|
Post by bird on Apr 8, 2008 22:25:27 GMT -5
hey is your limited slip still good? i have an open 35 in my 97tj? maybe a trade or somthing?
|
|
|
|
Post by ibgpin on Apr 9, 2008 6:41:06 GMT -5
What gear ratio? and not sure if thre is a diff or not but is it a C-clip 35?
I have a carrier from an 87 YJ Non C-clip had 3.07 gears on it. If it will work for you let me know.
|
|
|
|
Post by lowrad on Apr 9, 2008 16:53:22 GMT -5
Went through this with him on Dent so I'll give ya's the details here
It's a 96XJ with 3:55gears
SO...it'll be a C-Clip carrier(I'm pretty sure there different...correct me if I'm wrong guys)
SO nothing I have will work for him cause there all non-clip with 3:55
and as you know Jay the 3:07 carrier is different too
|
|
|
|
Post by ibgpin on Apr 9, 2008 17:27:11 GMT -5
Yep, looks like I'm out too. Thanks for the deats Low.
|
|
|
|
Post by mrbadweld on Apr 9, 2008 20:34:50 GMT -5
My limited slip works fine and looks fine. This jeep has been in the family since new. It has c-clip axles with 3:55s. I'd be happy to trade so I can use my locker. What ratio you got Bird? The non c-clip will not work ( i think) I picked one up today but haven't disassembled it yet, though it looks different. Any one need 3:79 gears?
|
|
|
|
Post by lowrad on Apr 9, 2008 20:52:42 GMT -5
There 3:73's.....man....I thought about it with the Ghost...but I'll prbably just end up goin to 4:10's when I put the 31's on...(just to keep everyting in check cause I'll be towin a Camper with it) ...o and FYI...you can run the 3:73's with that 3:55 carrier...that's the breakover point there...SO if you get another carrier or whatever from someone else...keep those gears and then you only have to re-gear the front to 3:73's Unless your goin higher or whatever like me....then you'll need the Carrier for a 4:10....but would that locker work for another carrier I wonder...that's an interesting question?hmmm....that one I don't know  |
|
bird
New Member
Posts: 16
|
Post by bird on Apr 9, 2008 21:42:27 GMT -5
not sure what ratio, sorry dono much about jeep axles and ratios and what they came with yada yada yada. It is a c clip axle, 97tj 5speed with a 4L. if that helps you at all. any of the numbers on the dif cover tell you anything i can get those if u want? but ya if itl work for you im down, limited slip will help me and u can get ur locker in.
|
|
|
|
Post by lowrad on Apr 10, 2008 5:10:58 GMT -5
5speed
Stock
Yours will be a 3:07 gears...and now that I think about it....I don't know if that carrier will work for the 3:55 or not....it might be the same carrier....I know that 3:55 to 4:10 is different...but don't know about 3:07 to 3:55.....time to do a little searchin on the net boys...lol
|
|
|
|
Post by mrbadweld on Apr 10, 2008 19:35:38 GMT -5
If you call your VIN to the dealership, could they tell your ratio. I don't mind doing it if you want. I'm for it if it will fit us both.
|
|
