Sourcing parts for a new build! Need quite a few!

[MDSLNGR]

Hey everyone. Trying to locate all parts for a new build. Not buying anything RIGHT now, but if the right part comes around, for the right price, I may pick it up. Basically, I'm jus trying to see what I can find around here, before travelling elsewhere. Heres the list:

Dana 60 Front, 4.56s
14-Bolt Rear, 4.56s
np-208 transfer case
sm-465 tranny
6" suspension lift kit for 73-87 chevy
73-87 chevy (preferably 1-ton) frame (regular cab, long box)
^^ Just need the frame, don't need the body
350ci (preferably), or 454ci chevy engine
if anyone knows where i can get a pre-70's chevy engine, 350ci+ for a decent price, let me know!
16.5x12-14" wheels with 8x6.5 bolt pattern

Well thats a majority of the parts I will need.. If anyone can get me started on these, let me know! I already have a price and location for ALL parts above, just looking to see if I can get a better price on any parts, and see if I can find anything closer to town. THANKS! SNWSLNGR.

[ibgpin]

I have a frame from I believe a 79 Blazer, it has been lengthend approx 10-15"' (looks decent)
It had a 88-98 Style Chev stepside body on it, and all mounts still in place to do so.
Rear spring hangers are gone, the rest is there and decent. Still has front springs and steering box in place.
Take it for $50
I also have 2 TBI 350's $350 ea.

[MDSLNGR]

niiiiiiiiiiiiice .. i tried calling you earlier this morning to ask you about that frame you had, but there was no answer .. is the frame we took the rear shackles off of? any idea what the kms are on the motors? if everything is decent, i may pick it all up .. thanks! SNWSLNGR.

[wranglerboy]

Thats cause IBGPIN works until like 4:30 or so. Least I seen him still there at 4:00.
Anyways, checking with a buddy, he has a 454, holley 4BBL, Edlebrock highrise intake, roller rockers, can't remember which cam, and a bunch other things done to it. He wanted to put it in my YJ last year, but I knew it wouldn't hold up with my foot! LOL
Anyways, think he wanted $600 for it, just needed it gone!

[MDSLNGR]

my foots prolly just as heavy lol .. is it a strong engine? caus the way you're making it out, doesnt sound very strong lol .. what year is it? and can you find out exactly whats done to it? thanks man. SNWSLNGR.

[ibgpin]

Didn't even realize it was you.. haha funny, yep that would be the frame.
Motors.. the better one has about 200km, was running good, aside from a wiring issue was causing it to throw a code 42. No smoke no knocks.
The other unknown mileage smokes abit on startup. I would probably suggest a rebuild, but a comp test would tell the tale for sure.
J

[wranglerboy]

Meant my YJ wouldn't hold up to my foot.
Anyways, he pulled it from his drag car, believe it was a 68 camero, but wasn't factory motor of course. It is a strong motor. In excess of 650 horses. That's all I know right now.
But I'll find out for ya.

[MDSLNGR]

niiiiiiiiiice .. i'm interested in the motor from Matty, and the frame from Jay .. can you find out whatever you can about the motor, n let me know! thanks! SNWSLNGR.

[wranglerboy]

Talked to him today, he just put it into his truck. He cooked the other one that was in it. Showedd me some pics, rods through block and all! LOL There is a chunk of block missing the size of half my steering wheel in the XJ! Said he got stopped 400 meters after it blew and only cause that's when he hit the ditch. LOL
So the motors not for sale now, but he's looking for a strong small block for ya, possibly another Big Block!

[MDSLNGR]

ok .. sounds good man .. let me know!

[wranglerboy]

Will do!

[thompy]

might have some things for you

got your 14 bolt with 4.56s needs drums 100.00

also have 2 10 inch front springs 200.00
rear 4 inch springs
and drop steering arm

or all the suspension and steering arm for 300

let me know