Post by fierodude on Oct 21, 2008 19:57:46 GMT -5
Set of solid axles off of a 1980 Chevy half ton, the front is a 10 bolt, and the rear is a 12 bolt. 12 bolt is an upgrade for 80s trucks. 308 ring and pinion ratio, both in excellent condition. Both were taken off of running truck front has locking hubs. Local delivery is available $300
Also I’ll be selling the Dana 44 and 12 bolt from under the K-5 soon. the brakes have been completely replaced last summer and there both spooled (Lincoln locked) and this time I know they wont break (I tried) the front has new ball joints and drilled flat top knuckles I also have the high steer arms to go with them and I’m adding my truss to the 44 also all studs and bearings on the 44 are new both are geared at 3:07 the only catch is I need the front calipers until I swap the 60 under the K-5 later this winter all together I’d like to get $500 as I’ve put more than this into it in parts
Complete Dana 44 for a jeep CJ currently disassembled its still spring under. Full size Wagoneer housing with ford half ton outers with all brake hardware comes with 3:07 gears $200
4:10 gears for a low pinion Dana 44 will fit all years these are the thick cut gears so they will fit all 3:90 and lower carriers $100
Yukon Dana 44 master regear kit new never opened this kit has everything bearings, shims, seals, cover gasket and more its not just a bearing kit I bought this to regear my 44 then bought a Dana 60 and now I don't need it $150
1 31x10.5R15 Goodyear MT was a spare but was never used still in mint condition $75
wanted/willing to trade for
im looking for SRW Chevy Dana 60 outers all I really need is the backing plate / caliper plate the spindles and the hubs I’ll buy the rest new anyway
and Both a np203 and a np205 from a th400 trany broken or not all I need is the input shafts
Also I’ll be selling the Dana 44 and 12 bolt from under the K-5 soon. the brakes have been completely replaced last summer and there both spooled (Lincoln locked) and this time I know they wont break (I tried) the front has new ball joints and drilled flat top knuckles I also have the high steer arms to go with them and I’m adding my truss to the 44 also all studs and bearings on the 44 are new both are geared at 3:07 the only catch is I need the front calipers until I swap the 60 under the K-5 later this winter all together I’d like to get $500 as I’ve put more than this into it in parts
Complete Dana 44 for a jeep CJ currently disassembled its still spring under. Full size Wagoneer housing with ford half ton outers with all brake hardware comes with 3:07 gears $200
4:10 gears for a low pinion Dana 44 will fit all years these are the thick cut gears so they will fit all 3:90 and lower carriers $100
Yukon Dana 44 master regear kit new never opened this kit has everything bearings, shims, seals, cover gasket and more its not just a bearing kit I bought this to regear my 44 then bought a Dana 60 and now I don't need it $150
1 31x10.5R15 Goodyear MT was a spare but was never used still in mint condition $75
wanted/willing to trade for
im looking for SRW Chevy Dana 60 outers all I really need is the backing plate / caliper plate the spindles and the hubs I’ll buy the rest new anyway
and Both a np203 and a np205 from a th400 trany broken or not all I need is the input shafts